Yanmar — Air cleaner cleaning
Maintenance · Air intake system
From a Yanmar service manual covering: 2TNV70, 3TNV70, 3TNV76. Check it applies to your exact model before use.
Applies to: Yanmar 2TNV70, Yanmar 2TNV70 engine, Yanmar 3TNV76 engine
Before you start
- Wear protective equipment such as goggles when blowing compressed air.
Parts for this job
- 12908712510 Air filter — Yanmar 3TNV76 engine KuduParts $19.00 FridayParts $99.95
Part numbers from the service-parts lists for Yanmar 2TNV70, Yanmar 3TNV76 engine. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Undo latches on dust pan and remove dust pan.
- Pull out air cleaner element.
- Blow air 0.29-0.49 MPa from inside element.
- Replace element if damaged, excessively dirty, or oily.
- Clean inside of dust pan.
- Reinstall element and dust pan; fasten latches.
Tools required
- compressed air Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Air blow 0.29-0.49 MPa (3.0-5.0 kgf/cm2)
Full service-parts list: Yanmar 2TNV70 →, Yanmar 3TNV76 engine →
Source: Yanmar service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.