Kohler KDI 1903 TCR / KDI 2504 TCR — Starting
Operation · engine
For the Kohler KDI 1903 TCR / KDI 2504 TCR, from the Kohler owner's manual.
Applies to: Kohler KDI 1903 TCR, Kohler KDI 2504 TCR
Before you start
- Make sure all warning lights on control panel are off when engine is running.
Procedure
- Check engine oil, fuel, and coolant levels; fill if necessary.
- Put ignition key in ignition switch if supplied.
- Turn key to ON position.
- Turn key beyond ON position and release when engine starts.
- Run at minimum speed according to ambient temperature table.
Specs & values
- Do not actuate starter more than 15 seconds at a time; wait one minute between attempts.
Full service-parts list: Kohler KDI 1903 TCR →, Kohler KDI 2504 TCR →
Source: Kohler owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.