Kohler KDI 1903 TCR / KDI 2504 TCR — Poly-V alternator belt check
Maintenance
For the Kohler KDI 1903 TCR / KDI 2504 TCR, from the Kohler owner's manual.
Applies to: Kohler KDI 1903 TCR, Kohler KDI 2504 TCR
Before you start
- Poly-V belt is not adjustable.
Parts for this job
Part numbers from the service-parts lists for Kohler KDI 1903 TCR, Kohler KDI 2504 TCR. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Check belt A condition; replace if worn out or deteriorated.
- Make sure ribs of belt G are correctly inserted into pulley grooves A.
- Start engine and run for some minutes, then turn off and let cool to ambient temperature.
- Check at point p that tension is between 149 and 196 Hz.
Tools required
- belt tension tool Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 149-196 Hz
Full service-parts list: Kohler KDI 1903 TCR →, Kohler KDI 2504 TCR →
Source: Kohler owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.