Kohler 24RCL / 30RCLH — Install and Connect Fuel Supply
Installation · fuel system
For the Kohler 24RCL / 30RCLH, from the Kohler service manual.
Applies to: Kohler 24RCL, Kohler KG2204 engine
Before you start
- Explosive fuel vapors can cause severe injury or death
Procedure
- Have the fuel supplier install a manual fuel shutoff valve and rigid gas piping to within 254 mm (10 in.) of the fuel inlet
- Remove the enclosure door on the service side
- Apply approved pipe sealant to the threaded fuel connections
- Use a flexible fuel line to connect the fuel supply to the 1 in. NPT fuel inlet connection
- Open the manual fuel valves and leak test all connections using soapy water
- If a leak is detected, close valves, clean fittings, apply fresh sealant, reconnect and recheck
- Verify the fuel system is set up for the fuel being used (NG or LPG)
Specs & values
- 1 in. NPT fuel inlet
Full service-parts list: Kohler 24RCL →
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.