Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Kohler›Clearing a Fault on the RDC2 Controller

Kohler 14RES / 20RES — Clearing a Fault on the RDC2 Controller

Testing & diagnosis

For the Kohler 14RES / 20RES, from the Kohler operator's manual.

Applies to: Kohler 14RES, Kohler 20RES, Kohler CH 740 engine, Kohler CH1000 engine

Before you start

  • Correct cause of fault before resetting

Procedure

  1. While fault message is displayed, press Select to go to Overview menu.
  2. Press Select again to display active fault message.
  3. Press Select; Confirm Clear Fault: NO is displayed.
  4. Press Down arrow; Confirm Clear Fault: YES is displayed.
  5. Press Select to enter YES and clear fault.
  6. Press Select to return to overview menu; controller changes to OFF mode.
  7. Press AUTO to place generator set in automatic mode.

Full service-parts list: Kohler 14RES →, Kohler 20RES →

Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →