Home›Repair guides›Katolight›Stopping the Engine

Katolight — Stopping the Engine

Operation · John Deere 6125HF070 engine

From a Katolight manual covering: 10.5 L, 12.5, D415FGJ4, D415FJJ4, D415FNJ4, D415FPJ4, D415FRJ4, D41S5FRJ4, KDGC-2001, KDGC-500, PowerTECH 10.5/12.5 L, UN-1GNOVOS. Check it applies to your exact model before use.

Applies to: Katolight D415FGJ4, Katolight D415FJJ4, Katolight D415FNJ4, Katolight D415FPJ4, Katolight D415FRJ4, Katolight D41S5FRJ4, John Deere 6125 HF 070 engine, John Deere 6125HF070 engine, Katolight 6125HF070 engine

Before you start

  • Ensure exhaust stack rain cap is installed when engine is not running

Procedure

  1. Disengage PTO clutch lever, if equipped.
  2. Run engine at 1000-1200 rpm for at least 2 minutes.
  3. Set slow idle speed.
  4. Turn key start switch to OFF and remove key.

Specs & values

  • Idle at least 2 minutes at 1000-1200 Amazon eBay rpm to cool hot engine parts

Full service-parts list: Katolight D415FGJ4 →, Katolight D415FJJ4 →, Katolight D415FNJ4 →, Katolight D415FPJ4 →, Katolight D415FRJ4 →, Katolight D41S5FRJ4 →, John Deere 6125 HF 070 engine →, John Deere 6125HF070 engine →

Source: Katolight manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Katolight repair guides →