Katolight — Replacing Air Cleaner Filter Elements
Maintenance
From a Katolight manual covering: 10.5 L, 12.5, D415FGJ4, D415FJJ4, D415FNJ4, D415FPJ4, D415FRJ4, D41S5FRJ4, KDGC-2001, KDGC-500, PowerTECH 10.5/12.5 L, UN-1GNOVOS. Check it applies to your exact model before use.
Applies to: Katolight D415FGJ4, Katolight D415FJJ4, Katolight D415FNJ4, Katolight D415FPJ4, Katolight D415FRJ4, Katolight D41S5FRJ4, John Deere 6125 HF 070 engine, John Deere 6125HF070 engine, Katolight 6125HF070 engine
Before you start
- Do not clean, wash or reuse the secondary element
Procedure
- Remove wing nut, canister cover and primary filter assembly.
- Thoroughly clean all dirt from inside canister.
- Squeeze dust unloader valve to remove dust.
- Replace secondary element only if green dot disappeared.
- Install new primary element and tighten wing nut securely.
- Depress air restriction indicator reset button if equipped.
Specs & values
- Restriction indicator/retaining nut: 14 Nm (10 lb-ft)
- Maximum air intake restriction 25 in. H2O (625 mm)
Full service-parts list: Katolight D415FGJ4 →, Katolight D415FJJ4 →, Katolight D415FNJ4 →, Katolight D415FPJ4 →, Katolight D415FRJ4 →, Katolight D41S5FRJ4 →, John Deere 6125 HF 070 engine →, John Deere 6125HF070 engine →
Source: Katolight manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.