Home›Repair guides›Katolight›Bleeding Fuel System

Katolight — Bleeding Fuel System

Maintenance · Low pressure fuel system

From a Katolight manual covering: 10.5 L, 12.5, D415FGJ4, D415FJJ4, D415FNJ4, D415FPJ4, D415FRJ4, D41S5FRJ4, KDGC-2001, KDGC-500, PowerTECH 10.5/12.5 L, UN-1GNOVOS. Check it applies to your exact model before use.

Applies to: Katolight D415FGJ4, Katolight D415FJJ4, Katolight D415FNJ4, Katolight D415FPJ4, Katolight D415FRJ4, Katolight D41S5FRJ4, John Deere 6125 HF 070 engine, John Deere 6125HF070 engine, Katolight 6125HF070 engine

Procedure

  1. Drain water from clear separator sediment bowl via drain valve.
  2. Attach open line to diagnostic port, place end in container.
  3. Pump hand primer until steady flow without bubbles.
  4. Disconnect line from diagnostic port.
  5. Start engine and run for five minutes.

Full service-parts list: Katolight D415FGJ4 →, Katolight D415FJJ4 →, Katolight D415FNJ4 →, Katolight D415FPJ4 →, Katolight D415FRJ4 →, Katolight D41S5FRJ4 →, John Deere 6125 HF 070 engine →, John Deere 6125HF070 engine →

Source: Katolight manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Katolight repair guides →