Honda — Wheel Kit Installation
Installation
From a Honda owner's manual covering: EB4000, EB5000, EB6500. Check it applies to your exact model before use.
Applies to: Honda EB4000, Honda EB6500, Honda iGX270 engine, Honda iGX390 engine
Procedure
- Install the two stands on the under frame using four 8×16 mm flange bolts.
- Install the two wheels on the axle shaft using the washers and split pins; bend the pins.
- Install the axle assembly on the generator using four 8×16 mm flange bolts and 8 mm flange nuts.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- TORQUE: 17–22 lbf·ft (24–29 N·m, 2.4–3.0 kgf·m)
Full service-parts list: Honda EB6500 →
Source: Honda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.