Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Honda›Starting the Engine

Honda — Starting the Engine

Operation

From a Honda owner's manual covering: EB4000, EB5000, EB6500. Check it applies to your exact model before use.

Applies to: Honda EB4000, Honda EB6500, Honda iGX270 engine, Honda iGX390 engine

Before you start

  • Do not allow the starter grip to snap back against the engine; return it gently.
  • Keep the generator at least 3 feet (1 meter) away from buildings and other equipment.

Procedure

  1. Make sure all appliances are disconnected from the AC receptacles.
  2. Make sure the AC circuit breaker is in the OFF position.
  3. Turn the fuel valve lever to the ON position.
  4. Make sure the Auto Throttle switch is in the OFF position.
  5. Turn the engine switch to the ON position.
  6. Pull the starter grip lightly until resistance is felt, then pull briskly.
  7. If you wish to use the Auto Throttle system, turn it ON after the engine has warmed up 2 or 3 minutes.

Full service-parts list: Honda EB6500 →

Source: Honda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Honda repair guides →