Honda — Engine Oil Change
Maintenance
From a Honda service manual covering: EB4000, EB5000, EB6500, EM4000SX, EM5000SXK3, EM6500SXK2. Check it applies to your exact model before use.
Applies to: Honda EB4000, Honda EB6500, Honda EM4000SX, Honda GX270T2 engine, Honda GX390T2 engine
Before you start
- Used engine oil contains substances that have been identified as carcinogenic. Wash hands thoroughly after contact.
Procedure
- Drain oil while engine is warm.
- Place suitable container under oil drain bolt.
- Remove oil filler cap, oil drain bolt, and washer.
- Install new oil drain washer and tighten drain bolt to specified torque.
- Fill with recommended oil to upper level mark.
- Tighten oil filler cap securely.
Specs & values
- TORQUE: 22.5 N·m (2.3 kgf·m, 17 lbf·ft)
- ENGINE OIL CAPACITY: 1.1 L (1.2 US qt, 1.0 Imp qt)
Full service-parts list: Honda EB6500 →, Honda EM4000SX →, Honda GX390T2 engine →
Source: Honda service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.