Home›Repair guides›Honda›Air Cleaner Check/Cleaning

Honda — Air Cleaner Check/Cleaning

Maintenance

From a Honda service manual covering: EB4000, EB5000, EB6500, EM4000SX, EM5000SXK3, EM6500SXK2. Check it applies to your exact model before use.

Applies to: Honda EB4000, Honda EB6500, Honda EM4000SX, Honda GX270T2 engine, Honda GX390T2 engine

Before you start

  • Excess oil will restrict air flow and may cause engine to smoke at startup.
  • Operating without element or loose element allows dirt to enter engine.

Procedure

  1. Remove air cleaner case lid springs and unhook tabs.
  2. Remove air cleaner cover and element.
  3. Check element and replace if damaged.
  4. Clean element in warm soapy water or non-flammable solvent, dry thoroughly.
  5. Dip filter in clean engine oil, squeeze out excess oil.
  6. Install air cleaner in reverse order of removal.

Full service-parts list: Honda EB6500 →, Honda EM4000SX →, Honda GX390T2 engine →

Source: Honda service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Honda repair guides →