Generac PRIMEPACT 70 — Stopping the Generator
Operation · Generator control panel
For the Generac PRIMEPACT 70, from the Generac owner's manual.
Applies to: Generac PRIMEPACT 70, Generac GN-480 engine
Procedure
- Turn OFF all electrical loads using the means provided.
- Let the generator run at no-load for a few minutes to stabilize internal temperatures.
- Place the Start/Stop switch in its STOP position; the engine will come to a complete stop.
Full service-parts list: Generac PRIMEPACT 70 →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.