Generac PRIMEPACT 70 — Battery Cable Connections
Installation · Battery / starter contactor
For the Generac PRIMEPACT 70, from the Generac owner's manual.
Applies to: Generac PRIMEPACT 70, Generac GN-480 engine
Before you start
- Verify the battery cable boot for the starter cable has been installed.
- Damage will result if the battery connections are made in reverse.
Procedure
- Connect the battery cable from the POSITIVE, POS or (+) post to the lug on the starter contactor.
- Connect the battery cable from the NEGATIVE, NEG or (-) post to the frame ground connection.
- Connect cables so the connectors are clean and tight.
Specs & values
- 12-volt Amazon eBay $11.99 FridayParts $65.01 automotive type battery, 400 cold cranking amps
Full service-parts list: Generac PRIMEPACT 70 →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.