Generac NP-30G — Engine air cleaner service
Maintenance
For the Generac NP-30G, from the Generac owner's manual.
Applies to: Generac NP-30G, Generac GN-220 engine
Parts for this job
- 78601 Air filter Amazon eBay $17.34 NAPA $10.38
Part numbers from the service-parts list for Generac NP-30G. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Remove air cleaner cover, then remove paper filter.
- Clean air filter by gently tapping it on a solid surface.
- Replace filter with a new one if it is too dirty; dispose of the old filter properly.
- Clean air cleaner cover, then insert new paper filter into cover.
- Assemble cover to the base of the air cleaner.
Specs & values
- Clean or replace once every 25 operating hours or once each year, whichever comes first.
Full service-parts list: Generac NP-30G →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.