Home›Repair guides›Generac›Engine Air Cleaner

Generac NP-30G — Engine Air Cleaner

Maintenance · Paper air filter

For the Generac NP-30G, from the Generac owner's manual.

Applies to: Generac NP-30G, Generac GN-220 engine

Parts for this job

Part numbers from the service-parts list for Generac NP-30G. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove air cleaner cover, then remove paper filter.
  2. Clean filter by gently tapping it on a solid surface, or replace if too dirty.
  3. Clean air cleaner cover, insert new paper filter into cover, assemble to base.

Specs & values

  • Service every 25 operating hours or once each year, whichever comes first

Full service-parts list: Generac NP-30G →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →