Home›Repair guides›Generac›Towing the Unit

Generac MLT4150MV — Towing the Unit

Operation · Trailer

For the Generac MLT4150MV, from the Generac owner's manual.

Applies to: Generac MLT4150MV, Mitsubishi S4L2 engine

Before you start

  • Maximum recommended highway towing speed is 45 mph (72 km/h)

Procedure

  1. Raise the rear jack and outrigger jacks fully into travel position
  2. Use the tongue jack to couple the trailer to the towing vehicle hitch and attach safety chains
  3. Lubricate the leveling jack grease fittings
  4. Connect trailer wiring and check directional/brake lights
  5. Verify mast cradle locking pin is secure and doors/enclosure are latched
  6. Check tire inflation and tighten wheel lugs in sequence per torque specification

Full service-parts list: Generac MLT4150MV →, Mitsubishi S4L2 engine →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →