Generac MDE330 — Adding Fuel
Operation · Fuel tank
For the Generac MDE330, from the Generac owner's manual.
Applies to: Generac MDE330, Perkins 1706J-E93TAG2 engine
Before you start
- Explosion and Fire. Do not overfill fuel tank.
Procedure
- Place unit on a firm, level surface in a well ventilated area.
- Verify unit is OFF.
- Remove fuel fill cap.
- Fill tank with diesel fuel to 0.25 in (6.4 mm) from bottom of fill neck.
- Install fuel fill cap.
Specs & values
- 0.25 in (6.4 mm) from bottom of fill neck
Full service-parts list: Generac MDE330 →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.