Generac MCG1000MT2 — Draining the Fuel/Water Separators
Maintenance
For the Generac MCG1000MT2, from the Generac owner's manual.
Applies to: Generac MCG1000MT2, Mitsubishi S12H-Y2PTAW-1 engine
Before you start
- All valves must be open during operation. Check prior to starting the unit.
Procedure
- Place a container under the drain cocks of the water separators.
- Open the drain cocks and drain the water.
- Close all the drain cocks.
Tools required
- Container Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Filtration to 30 micron (nominal)
Full service-parts list: Generac MCG1000MT2 →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.