Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Checking Engine Oil Level

Generac 9734 / NP-66LPG — Checking Engine Oil Level

Maintenance

For the Generac 9734 / NP-66LPG, from the Generac owner's manual.

Applies to: Generac 9734, Generac NP-66LPG, Generac GN-480 engine

Procedure

  1. Be sure the generator is as level as possible.
  2. Remove oil dipstick and wipe dry with clean, lint-free cloth.
  3. Install and tighten oil dipstick, then remove again.
  4. Oil should be at dipstick FULL mark; add recommended oil to FULL mark only.
  5. Do not fill above FULL mark; install and tighten dipstick cap before operating.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • 1.4 liters crankcase capacity

Full service-parts list: Generac 9734 →, Generac NP-66LPG →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →