Fischer Panda — Replacing the Glow Plugs
Repair & overhaul
From a Fischer Panda owner's manual covering: PMGi 10000, PMGi 8000, Panda 10000, Panda 10000i PMS, Panda 8000, Panda 8000i PMS, Panda 8000i PMS generator, Panda iControl2. Check it applies to your exact model before use.
Applies to: Fischer Panda Panda 10000i PMS, Fischer Panda Panda 8000i PMS generator
Before you start
- Remove battery main switch
Procedure
- Open capsule.
- Remove three hex screws using 7 mm socket wrench.
- Remove glow plug connector.
- Loosen glow plug using long 10 mm socket wrench.
- Remove glow plug; reinstall in reverse order.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Glow plug torque: 7.8 to 14.7 Nm
Full service-parts list: Fischer Panda Panda 10000i PMS →, Fischer Panda Panda 8000i PMS generator →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.