Fischer Panda — Replacing a Thermoswitch
Repair & overhaul
From a Fischer Panda owner's manual covering: PMGi 10000, PMGi 8000, Panda 10000, Panda 10000i PMS, Panda 8000, Panda 8000i PMS, Panda 8000i PMS generator, Panda iControl2. Check it applies to your exact model before use.
Applies to: Fischer Panda Panda 10000i PMS, Fischer Panda Panda 8000i PMS generator
Before you start
- Remove battery main switch
Procedure
- Open capsule; remove cable ties.
- Disconnect electric supply line of thermoswitch.
- Loosen thermoswitch with 22 mm wrench.
- Check label for correct item before installing new thermoswitch.
- Reinstall in reverse order.
Tools required
- Wrench W.A.F. 22 mm Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Fischer Panda Panda 10000i PMS →, Fischer Panda Panda 8000i PMS generator →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.