Fischer Panda — Replace raw water impeller
Maintenance · Raw water pump
From a Fischer Panda owner's manual covering: Panda 4000S.Neo, Panda 5000i.Neo, Panda 5000i.Neo PMS. Check it applies to your exact model before use.
Applies to: Fischer Panda Panda 5000i.Neo, Fischer Panda Panda 5000i.Neo PMS, Fischer Panda FPE-320 engine
Before you start
- Close raw water stop cock before work.
Procedure
- Close raw water stop cock.
- Remove pump cover wing screws.
- Pull impeller from shaft with multigrip pliers.
- Check and replace if damaged.
- Lubricate new impeller with glycerin or silicone spray.
- Fit impeller and cover with new seal.
Tools required
- Multigrip pliers Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Impeller set for pump F35B, part 0000651 eBay
Full service-parts list: Fischer Panda Panda 5000i.Neo →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.