Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Fischer Panda›Replacement of raw water impeller

Fischer Panda Panda 4200 / Panda 4500 — Replacement of raw water impeller

Maintenance · raw water pump

For the Fischer Panda Panda 4200 / Panda 4500, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda 4500, Fischer Panda Panda_4000s, Farymann 18W430 engine

Before you start

  • Close raw water stop cock before work.

Procedure

  1. Close raw water stop cock.
  2. Remove raw water pump cover screws.
  3. Pull impeller from shaft with multigrip pliers; mark its position.
  4. Check impeller for damage; lubricate with glycerin or silicone spray.
  5. Insert impeller on shaft in marked position.
  6. Fit cover with a new seal.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Fischer Panda Panda 4500 →, Fischer Panda Panda_4000s →

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →