Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Fischer Panda›Ventilating fuel system

Fischer Panda Panda 19i / Panda 19i PMS — Ventilating fuel system

Maintenance

For the Fischer Panda Panda 19i / Panda 19i PMS, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda 19i, Kubota D902 engine

Before you start

  • Fuel is flammable; no open flames.

Procedure

  1. Start fuel pump using iControl2 Prime Fuel if available.
  2. Open ventilation screw at fuel solenoid valve while pressing START.
  3. Place cloth under connection to catch fuel.
  4. Close screw when fuel runs without air bubbles, then release START.
  5. Switch panel OFF.
  6. Repeat until fuel withdraws perfectly at ventilation screw.
  7. If engine does not start, loosen injection line connecting nut and repeat; retighten after start.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Fischer Panda Panda 19i →, Kubota D902 engine →

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →