Home›Repair guides›Fischer Panda›Replacing fuel filter

Fischer Panda Panda 19i / Panda 19i PMS — Replacing fuel filter

Maintenance

For the Fischer Panda Panda 19i / Panda 19i PMS, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda 19i, Kubota D902 engine

Before you start

  • Fuel is flammable.

Parts for this job

Part numbers from the service-parts lists for Fischer Panda Panda 19i, Kubota D902 engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Clamp fuel inlet.
  2. Remove hoses from used filter.
  3. Fasten hoses to new filter; observe arrow for fuel flow direction.
  4. Check for leaks and bleed fuel system if necessary.

Specs & values

  • Replace at latest every 300 operating hours

Full service-parts list: Fischer Panda Panda 19i →, Kubota D902 engine →

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →