Fischer Panda Panda 19i / Panda 19i PMS — Refilling oil
Maintenance · Engine
For the Fischer Panda Panda 19i / Panda 19i PMS, from the Fischer Panda owner's manual.
Applies to: Fischer Panda Panda 19i, Kubota D902 engine
Before you start
- Burn hazard: generator and coolant can be hot.
Procedure
- Check oil level.
- Pull out dipstick and open oil filler cap.
- Fill in approx. 1/2 litre oil and wait about 2 minutes.
- Wipe dipstick, reinsert and check level.
- Repeat steps if oil level is still under 2/3.
- Close oil filler cap and casing.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Approx. 1/2 litre per refill step
Full service-parts list: Fischer Panda Panda 19i →, Kubota D902 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.