Fischer Panda Panda 19i / Panda 19i PMS — Daily starting preparation marine version
Operation · Generator
For the Fischer Panda Panda 19i / Panda 19i PMS, from the Fischer Panda owner's manual.
Applies to: Fischer Panda Panda 19i, Kubota D902 engine
Before you start
- Close sea cock after generator is switched off.
Procedure
- Check oil level (ideal 2/3 MAX).
- Check cooling water level in external expansion tank.
- Check sea cock open before start.
- Check and clean raw water filter.
- Visually inspect fixing bolts, hoses and electrical connections.
- Switch off load.
- Open fuel valve if installed.
- Close battery main switch.
Specs & values
- Oil level: about 2/3 MAX cold
Full service-parts list: Fischer Panda Panda 19i →, Kubota D902 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.