Fischer Panda Panda 15 mini PMS Digital — Replacement of impeller
Maintenance · Raw water pump
For the Fischer Panda Panda 15 mini PMS Digital, from the Fischer Panda owner's manual.
Applies to: Fischer Panda Panda 15 mini PMS Digital, Kubota D902 engine
Procedure
- Close raw water stop cock.
- Remove cover of raw water pump by loosening screws.
- Pull impeller from shaft with multigrip pliers; mark position.
- Check impeller for damage; replace if necessary.
- Lubricate impeller with glycerin or non-mineral oil based lubricant.
- Attach impeller to pump shaft.
- Fasten cover and use new seal.
Tools required
- multigrip pliers Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Fischer Panda Panda 15 mini PMS Digital →, Kubota D902 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.