Fischer Panda Panda 15 mini PMS Digital — Re-start with Failure Bypass Switch
Operation
For the Fischer Panda Panda 15 mini PMS Digital, from the Fischer Panda owner's manual.
Applies to: Fischer Panda Panda 15 mini PMS Digital, Kubota D902 engine
Before you start
- If temperature caused generator cutout under load, immediately check cooling system, fans, air intake or external cooling system.
Procedure
- Check oil level with dipstick before depressing button.
- Push button on front of generator to bypass faults.
- Start generator via remote control while button is depressed.
- If overheating caused cutout and oil is sufficient, run several minutes without load.
- Avoid continual use of bypass switch.
Full service-parts list: Fischer Panda Panda 15 mini PMS Digital →, Kubota D902 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.