Home›Repair guides›Fischer Panda›Re-magnetising rotor

Fischer Panda Panda 15 mini PMS Digital — Re-magnetising rotor

Repair & overhaul · Generator rotor

For the Fischer Panda Panda 15 mini PMS Digital, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda 15 mini PMS Digital, Kubota D902 engine

Before you start

  • Do not use a battery bank or generator starter battery; this could damage the winding.

Procedure

  1. Switch off shore power and interrupt any AC source.
  2. Switch generator off; power source selector to generator.
  3. Connect two poles of a 9 V battery to plug socket or on-board distributor contacts.
  4. Apply DC voltage only for 1-2 seconds.
  5. Start generator normally.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Apply DC voltage only for 1-2 seconds

Full service-parts list: Fischer Panda Panda 15 mini PMS Digital →, Kubota D902 engine →

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →