Fischer Panda Panda 15 mini PMS Digital — Check and discharge capacitors
Maintenance · AC control box capacitors
For the Fischer Panda Panda 15 mini PMS Digital, from the Fischer Panda owner's manual.
Applies to: Fischer Panda Panda 15 mini PMS Digital, Kubota D902 engine
Before you start
- Charged capacitors can be lethal. Do not touch capacitor contacts.
Procedure
- Never check capacitors while generator motor is running.
- Disconnect terminal lead wires using insulated pliers or screwdriver.
- Discharge capacitor terminals by bridging with discharge reactor.
- For three-phase capacitors discharge between L1-L2, L2-L3, L1-L3.
- Switch multimeter to capacitor measuring; connect probes to terminals.
- Measure capacity of each capacitor.
- Check all capacitors in electrical cabinet.
Tools required
- multimeter with capacitor measuring Amazon
- discharge reactor 5-10 kOhm Amazon
- insulated pliers/screwdriver Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Discharge reactor 5-10 kOhm
Full service-parts list: Fischer Panda Panda 15 mini PMS Digital →, Kubota D902 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.