Fischer Panda Panda 10000i PMS / Panda 8000i PMS — Replacement of fuel filter
Maintenance · fuel system
For the Fischer Panda Panda 10000i PMS / Panda 8000i PMS, from the Fischer Panda owner's manual.
Applies to: Fischer Panda Panda 10000i PMS, Kubota Z482 engine, Kubota Z602 engine
Before you start
- Fuel is flammable; no open flames
Procedure
- Clamp fuel inlet before exchanging filter.
- Remove hoses from used filter and fasten to new filter.
- Observe arrow on filter housing for fuel flow direction.
- For sight-glass filter, unscrew housing and filter element left-hand.
- Screw new filter element into mount.
- Lubricate sight-glass O-ring with heat-resistant grease and refit.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Replace after 300 operating hours at the latest
Full service-parts list: Fischer Panda Panda 10000i PMS →, Kubota Z482 engine →, Kubota Z602 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.