Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Fischer Panda›Replace air filter main element

Fischer Panda Panda 10000i PMS / Panda 8000i PMS — Replace air filter main element

Maintenance · air intake

For the Fischer Panda Panda 10000i PMS / Panda 8000i PMS, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda 10000i PMS, Kubota Z482 engine, Kubota Z602 engine

Procedure

  1. Use screwdriver to lever out tension spring.
  2. Lift air filter housing.
  3. Release three snap fastenings and remove lower housing part.
  4. Remove main element with light turning movement from inner support pipe.
  5. Clean main element by blowing out with dry compressed air max. 5 bar or replace after 2 years.
  6. Blow out filter insert in folding direction and from inside.
  7. Check filter insert with penlight for damage.
  8. Replace in reverse procedure.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Max. compressed air pressure 5 bar

Full service-parts list: Fischer Panda Panda 10000i PMS →, Kubota Z482 engine →, Kubota Z602 engine →

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →