Fischer Panda Panda 10000i PMS / Panda 8000i PMS — Refilling engine oil
Maintenance
For the Fischer Panda Panda 10000i PMS / Panda 8000i PMS, from the Fischer Panda owner's manual.
Applies to: Fischer Panda Panda 10000i PMS, Kubota Z482 engine, Kubota Z602 engine
Before you start
- Burn hazard
Procedure
- Check oil level and pull dipstick out.
- Open oil filler cap.
- Fill in approx. 1/2 litre of oil and wait about 2 minutes.
- Wipe dipstick, insert, remove, and check level.
- Repeat steps 3-4 if oil level is still under 2/3.
- Refit dipstick and close oil filler cap.
Tools required
- Engine oil Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Approx. 1/2 litre per fill step
Full service-parts list: Fischer Panda Panda 10000i PMS →, Kubota Z482 engine →, Kubota Z602 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.