Home›Repair guides›Fischer Panda›Clean raw water filter

Fischer Panda Panda 10000i PMS / Panda 8000i PMS — Clean raw water filter

Maintenance · raw water system

For the Fischer Panda Panda 10000i PMS / Panda 8000i PMS, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda 10000i PMS, Kubota Z482 engine, Kubota Z602 engine

Before you start

  • Close water cock before work

Procedure

  1. Close raw water stop cock.
  2. Release raw water filter from arrears.
  3. Beat the filter basket; it is mostly sufficient.
  4. If water seeps through cover, find cause; do not seal with adhesive.
  5. Replace sealing ring between caps and filter holder if needed.

Full service-parts list: Fischer Panda Panda 10000i PMS →, Kubota Z482 engine →, Kubota Z602 engine →

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →