Doosan — Change Fuel Filter Elements
Maintenance · Fuel filters
From a Doosan owner's manual covering: G 100, G100-SIIIA, G100SIIIA, G150, G150-SIIIA, G200-SIIIA, G60, G60-SIIIA, G60SIIIA, G80, G80-SIIIA, G80SIIIA. Check it applies to your exact model before use.
Applies to: Doosan G100-SIIIA, Doosan G150-SIIIA, Doosan G200-SIIIA, Doosan G60-SIIIA, Doosan G80-SIIIA, John Deere 4045HFG81 engine, John Deere 4045HFG82 engine, John Deere 6068HFG82 engine
Before you start
- Do not dump old fuel into the new filter element.
Procedure
- Clean fuel filter assembly and surrounding area.
- Disconnect water-in-fuel sensor wiring.
- Loosen drain plug and drain fuel into a suitable container.
- Grasp retaining ring and rotate clockwise 1/3 turn; remove ring and element.
- Inspect filter mounting base; clean as required.
- Install new filter element dry, properly indexed and seated.
- Install retaining ring with dust seal in place; hand tighten until it snaps.
- Bleed the fuel system.
Specs & values
- Primary and final fuel filters replaced together
Full service-parts list: Doosan G100-SIIIA →, Doosan G150-SIIIA →, Doosan G200-SIIIA →, Doosan G60-SIIIA →, Doosan G80-SIIIA →, John Deere 4045HFG81 engine →, John Deere 6068HFG82 engine →
Source: Doosan owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.