Cummins/Onan — Setting GEN TYPE
Adjustments · EC-30 setup
From a Cummins/Onan service manual — check it applies to your exact model before use.
Applies to: Cummins/Onan HDKA, Cummins/Onan HDKB, Cummins/Onan HDKC
Before you start
- GEN TYPE sets the service interval for service messages and critical automatic starting parameters.
Procedure
- Navigate to the SETUP & INFO display and press ENTER.
- Navigate to the SETUP GENSET display and press ENTER; the GEN TYPE is displayed.
- Press SET; the display will flash.
- Use the UP/DOWN key to select the GEN TYPE and press ENTER when the appropriate type is displayed.
Specs & values
- GEN TYPE choices: NONE, QD 10/12, QD 6/8, QD 5.5, GAS/LP, GAS RV
- Service In: QD 10/12 = 250 hours; QD 6/8 = 150 hours; QD 5.5 = 150 hours; GAS/LP = 150 hours; GAS RV = 150 hours
- First service interval is 50 hours for all models
Full service-parts list: Cummins/Onan HDKA →, Cummins/Onan HDKB →, Cummins/Onan HDKC →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.