Cummins/Onan — Resetting the Control (PCC)

Operation · PowerCommand Control 3100

From a Cummins/Onan owner's manual — check it applies to your exact model before use.

Applies to: Cummins/Onan DFE, Cummins/Onan KTA19 engine

Procedure

1. Press momentary Reset switch after condition is corrected.
2. For shutdown messages, Run/Off/Auto switch must be in Off position.
3. In Auto mode, cycle remote reset input for warnings.
4. For shutdown faults in Auto, remove remote start input then cycle remote reset input.

Full service-parts list: Cummins/Onan DFE →

Source: Cummins/Onan owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →