Home›Repair guides›Cummins/Onan›Prevent Accidental Starting Before Maintenance

Cummins/Onan — Prevent Accidental Starting Before Maintenance

Maintenance · Generator set

From a Cummins/Onan operator's manual — check it applies to your exact model before use.

Applies to: Cummins/Onan DFE, Cummins/Onan DFEJ, Cummins/Onan DFEK, Cummins/Onan QSX15 engine

Before you start

  • Accidental starting of the generator set can cause severe personal injury or death.
  • Disconnect battery charger from AC source before disconnecting battery cables.

Procedure

  1. Move the 0/Manual/Auto switch on the control panel to the 0 (off) position.
  2. Turn off or remove AC power from the battery charger.
  3. Remove the negative (-) battery cable from the generator set starting battery.

Full service-parts list: Cummins/Onan DFE →, Cummins/Onan DFEJ →, Cummins/Onan DFEK →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →