Home›Repair guides›Cummins/Onan›Out-of-Service Protection (Storage Over 30 Days)

Cummins/Onan — Out-of-Service Protection (Storage Over 30 Days)

Maintenance · Complete generator set

From a Cummins/Onan owner's manual covering: 10HDKAG, G1250s, SKB1.5U6D2RA. Check it applies to your exact model before use.

Applies to: Cummins/Onan 10HDKAG, Cummins/Onan HDKA, Kubota V1505-E3BG engine

Before you start

  • Battery electrolyte can cause severe eye damage and burns to the skin.

Procedure

  1. Exercise the genset until engine reaches operating temperature.
  2. Shut down and disconnect battery cables, negative first; store battery cool and dry.
  3. Trickle charge battery once every 30 days.
  4. Drain crankcase oil while warm, replace oil filter, refill and tag oil viscosity.
  5. Check coolant level and test mixture if freezing temperatures are possible.
  6. Plug the exhaust outlet.
  7. Clean and wipe entire genset; lightly coat rust-prone parts with grease or oil.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Cummins/Onan HDKA →, Kubota V1505-E3BG engine →

Source: Cummins/Onan owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →