Caterpillar — Starting the Engine (EMCP II and EMCP II+ Control Panels)
Operation
From a Caterpillar owner's manual covering: 3306B, 3406, 3406E, 3412C, SR4B. Check it applies to your exact model before use.
Applies to: Caterpillar 3306B, Caterpillar 3406, Caterpillar 3406E, Caterpillar 3412C, Caterpillar SR4B
Procedure
- Perform all inspections before starting.
- Turn the Engine Control Switch (ECS) to the Manual Start position. The engine will start and run.
- When the engine starts, the engine fault circuits are functional; if a fault occurs the engine is automatically shut down.
- After the engine starts and the systems have stabilized, apply the load.
- Regulate the frequency of the generator by using the optional governor switch, the optional Speed Potentiometer, or the Manual Governor Control Lever.
- Regulate the voltage level of the generator with the voltage adjust rheostat.
Full service-parts list: Caterpillar 3406 →, Caterpillar 3406E →, Caterpillar 3412C →, Caterpillar SR4B →
Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.