Specifications
| Fuel | diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 107 kW |
| Standby kVA | 134 |
| Prime power | 98 kW |
| Emissions | Interim Tier 4 |
| Controller | Power Zone |
| Oil capacity | 4.5 L |
| Alternator | Marathon Brushless/H (4-pole, Class H insulation) |
| Voltage options | 120 V, 139 V, 208 V, 220 V, 240 V, 277 V, 430 V, 480 V |
| Phase | 3 |
| Rated current | 161 / 372 A |
| Power factor | 1 (1Ø), 0.8 (3Ø) |
| Circuit breaker | 450 A |
| Battery group | 1 - 12V / 1000 CCA |
| Battery cranking | 1000 CCA |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Coolant capacity | 4.5 L |
| Max ambient | 49 °C |
| Dimensions (L×W×H) | 144×3×3 mm |
| Dry weight | 2469 kg |
| Sound level | 68.0 dBA @ 23 m |
| Fuel tank | 1295.0 L |
| Tank runtime | 44 hr |
Engine
| Oil capacity | 31.2 L |
|---|---|
| Coolant capacity | 29.8 L |
| Displacement | 4.5 L |
| Aspiration | turbocharged |
| Rated speed | 1800 rpm |
Same engine, other brands
2 brandsThe John Deere PE4045HFG93 in this set also powers 3 generator sets sold under 2 other brands. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.
| Brand | Models |
|---|---|
| Magnum | MMG130, MMG130D Super Start |
| Generac | MMG130 |
Maintenance & consumables
for the John Deere PE4045HFG93| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | paper element | — | 250 hr | ||
| Fuel filter | — | 500 hr | |||
| Oil filter | — | 500 hr | |||
| Battery | — | 500 hr | |||
| Belt | — | 1000 hr | |||
| Coolant | — | 250 hr | |||
| Oil | 31.2 | — | 500 hr | ||
| Spark plug | — | 250 hr |
Common questions
What is the power rating of the John Deere MMG130?
The John Deere MMG130 is rated 107 kW standby (134.0 kVA).
What engine is in the John Deere MMG130?
The John Deere MMG130 is powered by the John Deere PE4045HFG93 engine.
Is the John Deere MMG130 diesel or gas?
The John Deere MMG130 runs on diesel.
What's the oil capacity on a John Deere MMG130?
The John Deere PE4045HFG93 engine in the John Deere MMG130 has an oil capacity of 31.2 liters.
What is the cooling system capacity of the John Deere MMG130?
The John Deere MMG130 cooling system holds 4.5 liters (1.2 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the prime power rating of the John Deere MMG130?
The John Deere MMG130 is rated 98 kW prime (122 kVA), against 107 kW standby.
How loud is the John Deere MMG130?
The John Deere MMG130 is rated at 68.0 dBA at 23 m, per the manufacturer specification sheet.
How much does the John Deere MMG130 weigh?
The John Deere MMG130 has a dry weight of 2469 kg (5443 lb).
How big is the fuel tank on the John Deere MMG130?
The John Deere MMG130 has a 1295 liter (342 US gallon) fuel tank, giving about 44 hours of runtime.
What voltages is the John Deere MMG130 available in?
The John Deere MMG130 is offered in 120 V, 139 V, 208 V, 220 V, 240 V, 277 V, 3-phase.
How many cold cranking amps does the John Deere MMG130 require?
The John Deere MMG130 uses 1 battery, 12 V each, 1000 CCA, group 1 - 12V / 1000 CCA, per the manufacturer specification sheet.
What alternator comes on the John Deere MMG130?
The John Deere MMG130 uses a Marathon Brushless/H alternator. It has 4 poles. Insulation class H.
Parts
3| Part # | Description | Qty | System | |
|---|---|---|---|---|
| P-130D-001 | Air Filter | 1 | Air filter | Amazon eBay |
| P-175-002 | Oil Filter | 1 | Oil filter | Amazon eBay |
| P-205-003 | Fuel Filter | 1 | Fuel filter | Amazon eBay |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 50% | 11.7 | 3.1 |
| Prime | 75% | 17.8 | 4.7 |
| Prime | 100% | 23.5 | 6.2 |
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.