Specifications
| Fuel | Natural Gas or L.P. Vapor |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 10 kW |
| Standby kVA | 10 |
| Prime power | 7.2 kW |
| Controller | H-100 |
| Oil capacity | 3.8 L |
| Alternator | MMC 4G15 (2-pole, Class Class F insulation) |
| Voltage options | 120/240 V, 120/208 V, 277/480 V, 600 V |
| Phase | 3-phase |
| Rated current | 41.7 A |
| Power factor | 0.8 |
| Circuit breaker | 41.7 A |
| Battery group | 1 |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Coolant capacity | 6.6 L |
| Dimensions (L×W×H) | 1360×1697×918 mm |
Engine
| Oil capacity | 3.79 L |
|---|---|
| Coolant capacity | 7.57 L |
| Displacement | 1.468 L |
| Aspiration | naturally aspirated |
Maintenance & consumables
for the Mitsubishi 4G15| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Air cleaner service | — | 500 hr | ||
| Oil filter | Engine oil filter | — | 150 hr | ||
| Coolant | 50/50 low silicate ethylene glycol base antifreeze and soft water | — | |||
| Oil | High quality detergent oil SC/SD/SE/SF rated | — | 150 hr |
Common questions
What size generator is the Generac SG010?
The Generac SG010 is rated 10 kW standby (10.0 kVA).
Which engine powers the Generac SG010?
The Generac SG010 is powered by the Mitsubishi 4G15 engine.
What fuel type does the Generac SG010 take?
The Generac SG010 runs on Natural Gas or L.P. Vapor.
What is the oil capacity of the Generac SG010?
The Mitsubishi 4G15 engine in the Generac SG010 has an oil capacity of 3.79 liters.
What is the coolant capacity of the Generac SG010?
The Generac SG010 cooling system holds 6.6 liters (1.7 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the continuous rating of the Generac SG010?
The Generac SG010 is rated 7.2 kW prime (8 kVA), against 10 kW standby.
What voltage does the Generac SG010 produce?
The Generac SG010 is offered in 120/240 V, 120/208 V, 277/480 V, 600 V, 3-phase-phase.
What size battery does the Generac SG010 need?
The Generac SG010 uses 1 battery, 12 V each, group 1, per the manufacturer specification sheet.
Which alternator is fitted to the Generac SG010?
The Generac SG010 uses a MMC 4G15 alternator. It has 2 poles. Insulation class Class F.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 100% | 147.0 | 61.0 |
| Standby | 100% | 185.0 | 77.0 |
Available documents
This page was generated from the 3 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.