Specifications
| Frequency | 50.0 Hz |
|---|---|
| Standby power | 3 kW |
| Controller | Panda iControl digital display |
| Alternator | Fischer Panda Panda PMGi 4800 |
| Voltage options | 230 V |
| Phase | 1 |
| Max ambient | 40 °C |
| Dimensions (L×W×H) | 580×370×545 mm |
| Dry weight | 80 kg |
| Sound level | 54.0 dBA @ [7, 3, 1] m |
Common questions
What is the power rating of the Fischer Panda 4800i PMS?
The Fischer Panda 4800i PMS is rated 3 kW standby.
What engine does the Fischer Panda 4800i PMS use?
The Fischer Panda 4800i PMS is powered by the Farymann 18W430 engine.
What alternator does the Fischer Panda 4800i PMS use?
The Fischer Panda 4800i PMS uses a Fischer Panda Panda PMGi 4800 alternator.
Parts
127| Part # | Description | Qty | System | |
|---|---|---|---|---|
| FP1-000414 | relay 12V 30A NO 1 pole | 2 | Sensor | PartsGeek |
| FP1-000553 | sealing washer 06x10x1,0 DIN 7603 copper massive | 1 | Seal | PartsGeek |
| FP1-000560 | O-Ring FPM80 071,0x2,0mm | 1 | Seal | PartsGeek |
| FP1-000563 | O-Ring NBR70 9,0 x 2,0mm | 1 | Seal | PartsGeek |
| FP1-001462 | coolant pipe OD 12 115-90°-130-90°-77-45°-52 | 1 | Hose | PartsGeek |
| FP1-001485 | rubber mounts type C 30x40mm with double side internal thread M8 | 4 | Seal | PartsGeek |
| FP1-005625 | fuel solenoid valve GSR 12V with banjo bolt M12x1,5 | 1 | Sensor | PartsGeek |
| FP2-000002 | exhaust hose type Fischer Panda black with wirehelix inside 30mm | 1 | Hose | PartsGeek |
| FP2-000006 | tooth pulley (Impellerpump side) 32 teeth for Panda 4500 (SCB/FCB) PMS | 1 | Impeller | PartsGeek |
| FP2-000018 | tooth belt type 475-6-692-5MR for Panda 4 | 1 | Belt | PartsGeek |
| FP2-000021 | coolant pipe OD 12 20-180°-65 with 3/8" threadfitting | 1 | Hose | PartsGeek |
| FP2-000026 | coolant pipe OD 12 35-90°-45 with 3/8" threadfitting | 1 | Hose | PartsGeek |
| FP2-000030 | impeller pump F35B-8 | 1 | Pump | PartsGeek |
| FP2-000036 | coolant water hose type DIN 73411 NW 12mm | 1 | Hose | PartsGeek |
| FP2-000037 | coolant water hose type DIN 73411 NW 12mm | 1 | Hose | PartsGeek |
| FP2-000065 | coolant pipe OD 14 75-90°-145-12°-30-58°-60 with sleeve M6 | 1 | Hose | PartsGeek |
| FP2-000081 | coolant water hose type DIN 73411 NW 12mm | 1 | Hose | PartsGeek |
| FP2-000082 | coolant water hose type DIN 73411 NW 12mm | 1 | Hose | PartsGeek |
| FP2-000083 | coolant water hose type DIN 73411 NW 12mm | 1 | Hose | PartsGeek |
| FP2-000084 | formed hose 14mm 80mm-45°-45mm | 1 | Hose | PartsGeek |
| FP2-000144 | air filter bracket air suction housing Faryman-motor | 1 | Air filter | PartsGeek |
| FP2-000146 | airfilter insert 100x60x15mm type 1 | 1 | Air filter | PartsGeek |
| FP2-000147 | air-intake-hose 40mm, 130mm straight with noise absorber, EPDM | 1 | Hose | PartsGeek |
| FP2-000148 | gasket for Farymann diesel engine type 18W430 | 1 | Gasket | PartsGeek |
| FP2-000149 | coolant water hose type DIN 73411 NW 16mm | 1 | Hose | PartsGeek |
| FP2-000183 | oil drain hose 8mm length 600mm complete with fittings | 1 | Hose | PartsGeek |
| FP2-000186 | coolant water hose type DIN 73411 NW 12mm | 1 | Hose | PartsGeek |
| FP2-000187 | coolant water hose type DIN 73411 NW 12mm | 1 | Hose | PartsGeek |
| FP2-000210 | sealing washer 08x12x1,0 DIN 7603 copper massive | 4 | Seal | PartsGeek |
| FP2-000211 | coolant pipe OD 12 90-90°-200-45°-30-90°-40 | 1 | Hose | PartsGeek |
| FP2-000212 | sealing washer 08x12x2,0 DIN 7603 copper massive | 1 | Seal | PartsGeek |
| FP2-000214 | oil pressure switch Farymann 18W430 | 1 | Sensor | PartsGeek |
| FP2-000215 | Thermoswitch 98/83°C M14x1,5 SW22 NO | 1 | Sensor | PartsGeek |
| FP2-000218 | Hose Fittingset ID 8 L 495 with Ringnipple 90° | 1 | Hose | PartsGeek |
| FP2-000223 | sealing washer 13x18x1,5 DIN 7603 copper massive | 1 | Seal | PartsGeek |
| FP2-000224 | sealing washer 14x20x1,5 DIN 7603 copper massive | 2 | Seal | PartsGeek |
| FP2-000225 | Fuel hose Panda 4200 / 4500 | 1 | Hose | PartsGeek |
| FP2-000237 | end shield cover gasket 241x200x2mm 7 holes 9mm | 1 | Gasket | PartsGeek |
| FP2-000238 | alternator Panda 4200 FCB HP1 120V-60Hz | 1 | Alternator | PartsGeek |
| FP2-000266 | starter motor AZE 1508 0,9kW | 1 | Sensor | PartsGeek |
| FP2-000271 | gasket for starter motor AZE 1508 | 1 | Gasket | PartsGeek |
| FP2-000277 | coolant water hose type DIN 73411 NW 8mm | 1 | Hose | PartsGeek |
| FP2-000291 | Gasket oil cooler Panda 4 | 1 | Gasket | PartsGeek |
| FP2-000309 | coolant water hose type DIN 73411 NW 12mm | 1 | Hose | PartsGeek |
| FP2-000312 | coolant water hose type DIN 73411 NW 12mm | 1 | Hose | PartsGeek |
| FP2-000339 | Thermoswitch 83/78°C M14x1,5 SW22 NO | 1 | Sensor | PartsGeek |
| FP2-000556 | sealing washer 12x18x1,5 DIN 7603 copper massive | 2 | Seal | PartsGeek |
| FP2-000956 | Semi-conductor relay 48-600V AC 25A | 2 | Sensor | PartsGeek |
| FP2-001287 | Booster board RE0502 for 120V/1230V | 1 | Sensor | PartsGeek |
| FP2-001915 | rubber grommet double sided 12x20x24mm | 2 | Seal | PartsGeek |
| FP2-002343 | coolant pipe OD 12 95-90°-85 | 1 | Hose | PartsGeek |
| FP2-002345 | coolant pipe OD 12 100-90°-30 | 1 | Hose | PartsGeek |
| FP2-002585 | holder for hose 15mm | 2 | Hose | PartsGeek |
| FP2-003178 | formed hose 12mm 60mm-90°-85mm-90°-60mm | 1 | Hose | PartsGeek |
| FP2-003960 | Upper part thermostat housing P04 FC | 1 | Thermostat | PartsGeek |
| A10040CFC41HP1 | Panda PMS 4200 FCB | Service part / kit | PartsGeek | |
| FP1-000435 | flat fuse vehicle white 25 A | 1 | Service part / kit | PartsGeek |
| FP1-000516 | hexagon socket head cap screw M 8x30 | 3 | Service part / kit | PartsGeek |
| FP1-000523 | spring washer 8,1mm DIN 7980 A2 | 3 | Service part / kit | PartsGeek |
| FP1-000639 | Bleeder screw M6x10, painted blue | 1 | Service part / kit | PartsGeek |
| FP1-000664 | closing-screw M10x1, 8mm, SW 17, Al for oil-drain-fitting | 1 | Service part / kit | PartsGeek |
| FP1-000729 | diode type 1N 4007 | 1 | Service part / kit | PartsGeek |
| FP1-000996 | screwed cable gland M16 | 2 | Service part / kit | PartsGeek |
| FP1-001116 | screwed cable gland M20 | 1 | Service part / kit | PartsGeek |
| FP1-001425 | Distance piece, D=30mm, H=10mm | 2 | Service part / kit | PartsGeek |
| FP1-001429 | sound isolation capsule base part for Panda 4200 PMS FC GFK-3D | 1 | Service part / kit | PartsGeek |
| FP1-001431 | capsule base U-formed 20x75mm L=425mm | 2 | Service part / kit | PartsGeek |
| FP1-001433 | sound isolation capsule left Panda 4200 FCB PMS GFK 3D | 1 | Service part / kit | PartsGeek |
| FP1-001435 | sound isolation capsule right Panda 4200 FCB PMS GFK 3D | 1 | Service part / kit | PartsGeek |
| FP1-001436 | air inlet cover 170 x 155 x 23mm | 1 | Service part / kit | PartsGeek |
| FP1-001437 | sound isolation capsule base part for Panda 4200 PMS FC GFK-3D | 1 | Service part / kit | PartsGeek |
| FP1-001441 | Capsule pass through fuel + water IN-OUT P04 FCB | 1 | Service part / kit | PartsGeek |
| FP1-001445 | capsule pass through Exhaust gas P04 FCB | 1 | Service part / kit | PartsGeek |
| FP1-001447 | screwed cable gland M20 | 2 | Service part / kit | PartsGeek |
| FP1-001448 | sound isolation capsule complete for Panda 4 FCB PMS with 3D sound isolation | 1 | Service part / kit | PartsGeek |
| FP1-001469 | Bracket heat-exchanger | 1 | Service part / kit | PartsGeek |
| FP1-001542 | hexagon socket screw with flat point M 4x8 DIN 913 450HV | 6 | Service part / kit | PartsGeek |
| FP1-001547 | hexagon socket set screw with flat point M 8x30 DIN 913 A2 | 4 | Service part / kit | PartsGeek |
| FP1-001554 | grooved ball bearing 6207 ZZ LLUA | 1 | Service part / kit | PartsGeek |
| FP1-001625 | stud screw M 8x25 DIN 939 zinc plated | 4 | Service part / kit | PartsGeek |
| FP1-006090 | cable feed through KEL 24/S-1/2 | 1 | Service part / kit | PartsGeek |
| FP1-006112 | sound isolation capsule complete for Panda 4 FCB PMS with 3D sound isolation and Icotec cable gland | 1 | Service part / kit | PartsGeek |
| FP1-006114 | sound isolation capsule base part Panda 4 FC PMS 3D 120V/60Hz with Icotec cable feed through | 1 | Service part / kit | PartsGeek |
| FP1-006116 | sound isolation capsule right Panda 4200 FCB PMS GFK 3D | 1 | Service part / kit | PartsGeek |
| FP1-006118 | sound isolation capsule left Panda 4200 FCB PMS GFK 3D | 1 | Service part / kit | PartsGeek |
| FP1-006122 | protective sleeve KT7 clamping range 7-8mm, black | 1 | Service part / kit | PartsGeek |
| FP1-006123 | protective sleeve KT7 clamping range 12-13mm, black | 3 | Service part / kit | PartsGeek |
| FP1-006292 | Service Kit for F35B-8 | 1 | Service part / kit | PartsGeek |
| FP1-006790 | AC-Box Housing P4 (without additional Parts) | 1 | Service part / kit | PartsGeek |
| FP1-008653 | protective sleeve KT7 clamping range 15-16mm, black | 1 | Service part / kit | PartsGeek |
| FP1-009953 | connecting cable temperature switch P4 | 1 | Service part / kit | PartsGeek |
| FP2-000015 | tooth pulley (engine side) type 36-5M 36 teeth profil WZ 15123 for Panda 4500 (SCB/FCB) PMS | 1 | Service part / kit | PartsGeek |
| FP2-000031 | Junction board Type AK 6-pole 56x36mm, brass bolts M5x29mm | 1 | Service part / kit | PartsGeek |
| FP2-000034 | wing nut M 4 DIN 315 A2 | 4 | Service part / kit | PartsGeek |
| FP2-000114 | capsule lock with t-handle 112mm, complete with keeper | 2 | Service part / kit | PartsGeek |
| FP2-000115 | keeper particularly for capsule lock with t-handle 112mm | 3 | Service part / kit | PartsGeek |
| FP2-000116 | capsule lock with t-handle 112mm, single without keeper | 2 | Service part / kit | PartsGeek |
| FP2-000150 | air suction housing complete Faryman-motor | 1 | Service part / kit | PartsGeek |
| FP2-000156 | wiring harness complete for Panda 4500 (Panda 04) PMS FC with 12 connectors | 1 | Service part / kit | PartsGeek |
| FP2-000157 | cover acrylic-glass U-profile 68x31x14mm | 1 | Service part / kit | PartsGeek |
| FP2-000192 | Reduzierstück 3/8" external thread 1/4" | 1 | Service part / kit | PartsGeek |
| FP2-000198 | engine bracket right P04 | 1 | Service part / kit | PartsGeek |
| FP2-000202 | engine bracket left side for P04 | 1 | Service part / kit | PartsGeek |
| FP2-000205 | banjo bolt DIN7643 M8x1,0 NW2 | 2 | Service part / kit | PartsGeek |
| FP2-000206 | banjo bolt M12x1,5 NW6 with tapped through hole M8 | 1 | Service part / kit | PartsGeek |
| FP2-000217 | banjo bolt DIN7643 R1/4" NW8 | 1 | Service part / kit | PartsGeek |
| FP2-000229 | Bearing carrier for Bearing 6207 | 1 | Service part / kit | PartsGeek |
| FP2-000231 | end shield cover for Panda 4200 PMS FCB | 1 | Service part / kit | PartsGeek |
| FP2-000234 | Alternator bracket Panda 4 | 1 | Service part / kit | PartsGeek |
| FP2-000248 | cooling water block for Panda 4500 FCB (Panda 4) PMS | 1 | Service part / kit | PartsGeek |
| FP2-000276 | plug connector GDM 2009, 2 pole+PE | 1 | Service part / kit | PartsGeek |
| FP2-000280 | heat exchanger for Marine P04 with expansion tank | 1 | Service part / kit | PartsGeek |
| FP2-000294 | Oil cooler complete for Panda 4 FC | 1 | Service part / kit | PartsGeek |
| FP2-000313 | Bracket heat-exchanger | 1 | Service part / kit | PartsGeek |
| FP2-000323 | terminal box P04 without additional parts | 1 | Service part / kit | PartsGeek |
| FP2-000330 | exhaust manifold for Panda 4500 (Panda 4) PMS | 1 | Service part / kit | PartsGeek |
| FP2-000332 | screwed cable gland M12 | 1 | Service part / kit | PartsGeek |
| FP2-000523 | capacitor 60µF MKP 50x148mm | 2 | Service part / kit | PartsGeek |
| FP2-000544 | resistor 100 kOhm 2,0 W | 2 | Service part / kit | PartsGeek |
| FP2-000546 | capacitor 40µF MKP 45x119mm | 2 | Service part / kit | PartsGeek |
| FP2-000658 | Varistor type SIOV complete | 2 | Service part / kit | PartsGeek |
| FP2-000678 | End bracket E/NS 35 N | 1 | Service part / kit | PartsGeek |
| FP2-000679 | Universal terminal block with screw connection 0.2-4mm² gray | 6 | Service part / kit | PartsGeek |
| FP2-000707 | Ground terminal block with screw connection 0.2-4 mm² green-yellow | 1 | Service part / kit | PartsGeek |
| FP2-001038 | Top hat rail perforated 35x7,5mm zinc plated | 1 | Service part / kit | PartsGeek |
| FP2-001289 | Relay bracket (AC-Box P4) | 1 | Service part / kit | PartsGeek |
| FP2-001309 | AC-Box complete Panda 4 FC PMS 120V/60Hz with capacitors | 1 | Service part / kit | PartsGeek |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.