HomeFG WilsonFG Wilson P675P5

FG Wilson P675P5 Generator Set

The FG Wilson P675P5 is a 450 kW (909 kVA) diesel standby generator set powered by a Perkins 2806A-E18TAG3 engine. It is available at 480 V, 60 Hz. It holds about 62 L (16.4 gal) of oil and 61 L (16.1 gal) of coolant. The same 2806A-E18TAG3 engine also powers generator sets from Perkins.

450 kW
Standby
18.1 L
Displacement
62.0 L
Oil capacity
3
Document types

How to read your FG Wilson serial & model number →

Typical fuel consumption for 450–455 kW Diesel generators →

Compare with other 450–455 kW Diesel generators →

Specifications

Fueldiesel
Frequency60.0 Hz
Standby power450 kW
Prime power540 kW
ControllerEasYgen 3200
Oil capacity62.0 L
AlternatorLeroy-Somer LL7024J
Voltage options480 V
Power factor0.8

Engine

Perkins 2806A-E18TAG3
Oil capacity62.0 L
Coolant capacity61.0 L
Displacement18.1 L
AspirationTurbocharged and air-to-air charge cooled
Rated speed1500 rpm

Same engine, other brands

1 brand

The Perkins 2806A-E18TAG3 in this set also powers 1 generator set sold under 1 other brand. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.

BrandModels
Perkins2806A-E18TAG3

Maintenance & consumables

for the Perkins 2806A-E18TAG3
ItemSpecCapacityPart #Interval
Air filter125 hr
Fuel filter543 hr
Oil filterCartouche interchangeab10 hr
Battery
Belt1800 hr
Coolant61.0
OilCentrifuge62.024 hr
Spark plug10 hr

Common questions

What is the power rating of the FG Wilson P675P5?

The FG Wilson P675P5 is rated 450 kW standby.

What engine is in the FG Wilson P675P5?

The FG Wilson P675P5 is powered by the Perkins 2806A-E18TAG3 engine.

What kind of fuel does the FG Wilson P675P5 run on?

The FG Wilson P675P5 runs on diesel.

What is the oil capacity of the FG Wilson P675P5?

The Perkins 2806A-E18TAG3 engine in the FG Wilson P675P5 has an oil capacity of 62.0 liters.

What is the cooling system capacity of the FG Wilson P675P5?

The FG Wilson P675P5 cooling system holds 61 liters (16.1 US gallons) for the engine, per the manufacturer specification sheet.

What is the continuous rating of the FG Wilson P675P5?

The FG Wilson P675P5 is rated 540 kW prime (909 kVA), against 450 kW standby.

What voltage does the FG Wilson P675P5 produce?

The FG Wilson P675P5 is offered in 480 V.

Which alternator is fitted to the FG Wilson P675P5?

The FG Wilson P675P5 uses a Leroy-Somer LL7024J alternator.

Parts

1
Part #DescriptionQtySystem
P26-1STwo large doors on each side2Service part / kit Amazon eBay $117.00

Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.

Fuel consumption

RatingLoadL/hgal/h
Prime170.945.15
Standby155.641.1

Available documents

Spec sheet — NEW ENGLISH Matrix(GB)(1212) (FG Wilson)Spec sheet — Options+Matrix(GB)(0612) (FG Wilson)Spec sheet — P675P5-P750E5(1PP)GB(0307) (FG Wilson)Spec sheet — P675P5-P750E5(1PP)IT(0307) (FG Wilson)Reference — 550-750 KVA SA Enclosure(IT)(0707) (FG Wilson)Reference — 550-750 kVA SA Enclosure(GB)(0707) (FG Wilson)Reference — 6. FG Wilson powers one of the world’s largest multi-unit installations (FG Wilson)Reference — FG+Wilson+powers+one+of+the+world’s+largest+multi-unit+installations(ES) (FG Wilson)Reference — Finished+Options+MatrixGB(0312) (FG Wilson)Reference — Options Matrix (ES)(0113) (FG Wilson)Reference — Options Matrix(GB)(1012) (FG Wilson)Parts manual — 550-750 kVA SA Enclosure(GB)(0412) (FG Wilson)Parts manual — 550-750+kVA+SA+Enclosure(GB)(1110) (FG Wilson)Parts manual — Options Matrix (ES)(1012) (FG Wilson)

This page was generated from the 14 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.