Service parts for the P13.5E2
Grouped by system, with how many of each the parts manual calls for.
Oil system
1 requiredPrices captured from merchant listings; some links are affiliate links. Confirm against your serial number before ordering.
Specifications
| Fuel | diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby power | 11 kW |
| Standby kVA | 13 |
| Prime power | 73 kW |
| Oil capacity | 5.98 L |
| Alternator | Leroy-Somer LL1014H |
| Voltage options | 380 V, 415 V |
| Phase | 3 Phase |
| Power factor | 0.8 |
| Dimensions (L×W×H) | 1684×860×1252 mm |
| Dry weight | 654 kg |
| Sound level | 61.5 dBA @ 1 m |
| Fuel tank | 45.0 L |
Engine
| Oil capacity | 5.98 L |
|---|---|
| Coolant capacity | 5.98 L |
| Displacement | 1.496 L |
| Aspiration | Natural aspiration |
| Rated speed | 1500 rpm |
Same engine, other brands
1 brandThe Perkins 403C-15G in this set also powers 1 generator set sold under 1 other brand. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.
| Brand | Models |
|---|---|
| Perkins | 403C-15 |
Maintenance & consumables
for the Perkins 403C-15G| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Oil filter | 140517050 | 500 hr | Amazon eBay $22.08 KuduParts $19.00 FridayParts $20.80 | ||
| Oil | — | 500 hr |
Common questions
What is the power rating of the FG Wilson P13.5E2?
The FG Wilson P13.5E2 is rated 11 kW standby (13.8 kVA).
Which engine powers the FG Wilson P13.5E2?
The FG Wilson P13.5E2 is powered by the Perkins 403C-15G engine.
What fuel does the FG Wilson P13.5E2 use?
The FG Wilson P13.5E2 runs on diesel.
What is the oil capacity of the FG Wilson P13.5E2?
The Perkins 403C-15G engine in the FG Wilson P13.5E2 has an oil capacity of 5.98 liters.
What is the coolant capacity of the FG Wilson P13.5E2?
The FG Wilson P13.5E2 cooling system holds 5.98 liters (1.6 US gallons) for the engine, per the manufacturer specification sheet.
What is the continuous rating of the FG Wilson P13.5E2?
The FG Wilson P13.5E2 is rated 73 kW prime (87 kVA), against 11 kW standby.
How loud is the FG Wilson P13.5E2?
The FG Wilson P13.5E2 is rated at 61.5 dBA at 1 m, per the manufacturer specification sheet.
How much does the FG Wilson P13.5E2 weigh?
The FG Wilson P13.5E2 has a dry weight of 654 kg (1441 lb).
How big is the fuel tank on the FG Wilson P13.5E2?
The FG Wilson P13.5E2 has a 45 liter (12 US gallon) fuel tank.
What voltage does the FG Wilson P13.5E2 produce?
The FG Wilson P13.5E2 is offered in 380 V, 415 V, 3 Phase-phase.
Which alternator is fitted to the FG Wilson P13.5E2?
The FG Wilson P13.5E2 uses a Leroy-Somer LL1014H alternator.
What oil filter does the FG Wilson P13.5E2 use?
The FG Wilson P13.5E2 uses oil filter part number 140517050.
Parts
2| Part # | Description | Qty | System | |
|---|---|---|---|---|
| 403C-15 | Cylinder head gasket | Gasket | eBay $66.49 FridayParts $9.90 SinoCMP $139.00 | |
| 955-806 | Black zinc die cast hinges tested and proven to withstand extremely corrosive conditions | Service part / kit | Amazon eBay |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 100% | 3.7 | 1.0 |
| Standby | 100% | 4.1 | 1.1 |
Available documents
This page was generated from the 22 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.