Specifications
| Fuel | diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby power | 153 kW |
| Standby kVA | 165 |
| Prime power | 146 kW |
| Emissions | EPA Stage II |
| Power factor | 0.8 |
| Dimensions (L×W×H) | 1870×866×1239 mm |
| Dry weight | 770 kg |
Engine
| Displacement | 7.2 L |
|---|---|
| Aspiration | turbocharging and charge air cooling |
| Rated speed | 1500 rpm |
Filters for the Deutz BF6M 1013EC
6Engine-mounted filters the filter manufacturers list for this engine family. These come from the engine, not from this generator set’s own parts list, so confirm against your serial number before ordering.
| System | Filter | Description | Cross-references | |
|---|---|---|---|---|
| Oil filter | P553771 | Lube Filter, Spin-On Full Flow | DEUTZ 01173430, DEUTZ 01173430EE, NAPA 1820, TEREX 00073033 | FridayParts $232.20 |
| Oil filter | P550317 | Lube Filter, Spin-On Full Flow | NAPA 1820, RENAULT VI 0000054020, RENAULT VI 0000504020, RENAULT VI 0001907947 | buy |
| Fuel filter | P553004 | Fuel Filter, Spin-On | DEUTZ 01174423, DEUTZ 01180597, NAPA 3358, RENAULT VI 0000150564 | FridayParts $18.20 |
| Fuel filter | P554620 | Fuel Filter, Spin-On | DEUTZ 01174422, DEUTZ 01181245, NAPA 3358, BALDWIN BF900 | KuduParts $40.00 |
Listed for this engine in only one kind of machine, so they may depend on how the engine was installed:
| System | Filter | Description | Cross-references | |
|---|---|---|---|---|
| Fuel / water separator | P550588 | Fuel Filter, Water Separator Spin-On Twist&Drain | DEUTZ 01174482, DEUTZ 1174482, NAPA 3472, BALDWIN BF587-D | FridayParts $18.44 |
| Fuel / water separator | P551435 | Fuel Filter, Water Separator Cartridge | DEUTZ-FAHR 090004562, DEUTZ-FAHR 090020434, NAPA 3738, NAPA 3977 | FridayParts $32.99 |
Common questions
What is the power rating of the Deutz BF6M 1013 E?
The Deutz BF6M 1013 E is rated 153 kW standby (165.0 kVA).
Which engine powers the Deutz BF6M 1013 E?
The Deutz BF6M 1013 E is powered by the Deutz BF6M 1013EC engine.
Is the Deutz BF6M 1013 E diesel or gas?
The Deutz BF6M 1013 E runs on diesel.
What is the prime power rating of the Deutz BF6M 1013 E?
The Deutz BF6M 1013 E is rated 146 kW prime (157 kVA), against 153 kW standby.
What is the dry weight of the Deutz BF6M 1013 E?
The Deutz BF6M 1013 E has a dry weight of 770 kg (1697 lb).
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 25% | 931.21 | 246.0 |
| Prime | 50% | 223.0 | 367.0 |
| Prime | 75% | 222.0 | 365.0 |
| Prime | 100% | 226.0 | 372.0 |
Available documents
This page was generated from the 5 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.