Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 1000 kW |
| Standby kVA | 1250 |
| Emissions | EPA Tier 2 |
| Controller | EMCP 4 |
| Oil capacity | 99.0 L |
| Alternator | 1402 |
| Voltage options | 480 V |
| Phase | 3 |
| Power factor | 0.8 |
| Coolant capacity | 55.0 L |
| Dimensions (L×W×H) | 4234×2010×2174 mm |
Engine
| Oil capacity | 99.0 L |
|---|---|
| Coolant capacity | 55.0 L |
| Displacement | 32.1 L |
| Aspiration | TA |
| Rated speed | 1800 rpm |
Maintenance & consumables
for the Caterpillar C32 TA| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Oil | Sump refill with filter | 99.0 L | — |
Common questions
How many kW is the Caterpillar C32DR35?
The Caterpillar C32DR35 is rated 1000 kW standby (1250.0 kVA).
What engine does the Caterpillar C32DR35 use?
The Caterpillar C32DR35 is powered by the Caterpillar C32 TA engine.
Is the Caterpillar C32DR35 diesel or gas?
The Caterpillar C32DR35 runs on Diesel.
How much oil does the Caterpillar C32DR35 take?
The Caterpillar C32 TA engine in the Caterpillar C32DR35 has an oil capacity of 99.0 liters.
What is the coolant capacity of the Caterpillar C32DR35?
The Caterpillar C32DR35 cooling system holds 55 liters (14.5 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What voltage does the Caterpillar C32DR35 produce?
The Caterpillar C32DR35 is offered in 480 V, 3-phase.
Which alternator is fitted to the Caterpillar C32DR35?
The Caterpillar C32DR35 uses a 1402 alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Standby | 50% | 144.7 | 38.2 |
| Standby | 75% | 213.4 | 56.4 |
| Standby | 100% | 272.1 | 71.9 |
Available documents
Spec sheet — CAT-C32-DM9933 (Caterpillar)
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.