Westinghouse WH1000i / WH2000i — Changing Engine Oil
Maintenance
For the Westinghouse WH1000i / WH2000i, from the Westinghouse owner's manual.
Applies to: Westinghouse WH1000i
Before you start
- Never dispose of used engine oil into a sewer, ground, or waterways
Procedure
- Stop the engine and let it cool for several minutes
- Remove the engine service panel to access oil fill/drain plug
- Place oil pan under the oil fill/drain plug
- Clean around the oil fill/drain plug
- Tilt the inverter so oil drains into the container
- Allow oil to completely drain
- Fill crankcase with oil per Adding Engine Oil procedure
- Dispose of used engine oil properly
Full service-parts list: Westinghouse WH1000i →
Source: Westinghouse owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.